上海交通大學機械制造及其自動化導師：倪軍 正文

    　　
    倪軍
　　教授
　　制造技術與裝備自動化研究所
    辦公電話 021- 34206765
　　通訊地址 上海交大機械與動力工程學院
　　電子郵件 junni@umich.edu
　　
　　?教育背景
　　1987 Univ. of Wisconsin-Madison Mechanical Eng    博士
　　1984 Univ. of Wisconsin-Madison Mechanical Eng    碩士
　　1982 Shanghai Jiao Tong University Mechanical Eng 學士

　　?工作經歷
　　1997.09 - 至今，美國密西根大學機械工程系教授
　　1993.01－1997.08，美國密西根大學機械工程系副教授
　　1989.09－1992.12，美國密西根大學機械工程系助理研究員
　　1987.09－1989.08，美國密西根大學機械工程系博士后
　
　　?研究方向
　　Advanced Manufacturing Technology

　　?科研項目
　　1.“High Definition Metrology and Processes – 2 micron manufacturing,” NIST-ATP, $3,600,000, 11/1/2007-10/31/2010, PI from UM (PI: Ni, co-PIs: Hu, Shih, and Islami)
　　2. “Advanced Manufacturing Process Modeling and Tooling Optimization,” General Electrical Aircraft Engines, $1,250,000, 5/1/05-4/30/2010
　　3.“Rapid, Ultra Precision Direct Metal Deposition Technology,” NIST-ATP, amount: $5,000,000, 6/1/2004 – 5/31/08, PI from UM
　　4.“Engineering Research Center for Reconfigurable Manufacturing Systems,” National Science Foundation (EEC-9529125), $3,600,000, 4/1/05-3/31/06 (PI: Koren, Co-PI: Ni)
　　5.“Fundamental Aspects of Micro Internal Combustion Swing Engine (MICSE) Portable Power Generation Systems,” DARPA, $600,000, 9/1/04-8/31/06
　　6.“Fuel Processors for PEM Fuel Cells,” US Department of Energy, $5,598,478, 1/1/02-12/31/05, (Co-Pis: L. Thompson, E. Gulari, J. Ni, J. Schwank, R. Yang)
　　7.“Micro Internal Combustion Swing Engine (MICSE) System for Portable Power” DARPA/DSO, $3,337,054, 5/1/01-6/30/2004, (Co-PIs:  W. Dahm and J. Ni
　　8.“Development of Virtual Machine Tool Systems,” National Science Foundation (DMI-0004237),   $450,000, 9/1/00 – 8/31/03, PI
　　9.“Presidential Faculty Fellows Awards,” National Science Foundation, $500,000, 10/1/94 - 9/30/01, Principal Investigator
　　10.“Real-Time High-Speed Active Balancing,” NIST-Advanced Technology Programs, $1,984,113 Principal Investigator, 11/1/97 - 10/31/2000
　　11.“Agile and Precision Sheet Metal Stamping,” Advanced Technology Program, National Institute of Standards and Technology (NIST), $8,301,000, 11/1/95 - 6/30/00 (UM’s share is around $4 million), Co-PIs from UM: J. Shi, J. Ni, J. Hu, A. Ghosh, and X. Wu
　　12.“Advanced Compensation System for Quasi-static and Cutting Force-induced Errors for Turning Centers,” Defense Advanced Research Projects Agency (DARPA), $997,620, 7/1/94 - 11/30/96, Principal Investigator
　　13."Variation reduction in automotive assembly and stamping processes," Chrysler Corporation, $940,000, 1/1/93/ - 12/31/96, Co-PIs:  J. Ni, and J. Hu
　　14."Development of an Adaptive Compensation Technique for Enhancing CMM Accuracy," Advanced Technology Program, National Institute of Standards and Technology (NIST), $993,609, 3/1/93 - 2/28/95, Principal Investigator
　　15."Development of Advanced Technologies and Systems for Controlling Dimensional Variation in Automobile Body Manufacturing – 2 mm Program," Advanced Technology Program, National Institute of Standards and Technology (NIST), $13,867,872, (UM’s share was around $6 million) 9/1/92 - 8/30/95, Co-PIs:  S. M. Wu, J. Ni, and J. Hu
　　16."Development of a Modular Thermal Error Sensing and Compensation System on Machining Centers", U.S. Air Force Manufacturing Technology Program and NIST, $499,067, 11/1/91 - 10/30/93, Co-PIs: S.M. Wu, J. Ni
　　17.國家自然科學基金重大國際合作研究項目“燃料電池微細制造的基礎理論和關鍵技術研究” （2008-2010年），外方負責人。
　　18.國家外國專家局、教育部高等學校學科創新引智基地“汽車數字化設計與制造”（編號B06012)，外方負責人，學術大師。

　　?代表性論文專著
　　1.J. Tao, A. J. Shih, J. Ni, 2008, “Experimental Study of the Dry and Near-Dry Electrical Discharge Milling Processes,” ASME Journal of Manufacturing Science and Engineering, Vol. 130(1), pp. 1-9
　　2.Z. Huang, A.J. Shih, and J. Ni, 2007, “Laser Interferometry Hologram Registration for Three-Dimensional Precision Measurements,” ASME Journal of Manufacturing Science and Engineering, Vol. 128, pp. 1006-1013.
　　3.H. S. Kim, M. Koc, and J. Ni, 2007, “A hybrid multi-fidelity approach to the optimal design of warm forming process using a knowledge-based artificial neural network”, International Journal of Machine Tools and Manufacture, Vol. 47, No. 2, pp. 211-222
　　4.Kim, G.Y. Koc, M., Mayor, R., and Ni, J., 2007,"Modeling of the Semi-solid Material Behavior and Analysis of Micro/meso-scale Feature Forming", ASME Journal of Manufacturing Science and Engineering, Vol. 129, No. 2, pp.237-245
　　5.Z. Yang, Q. Chang, D. Djurdjanovic, J. Ni, and J. Lee, 2007, “Maintenance Priority Assignment using On-line Production Information,” ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 129, No. 2, pp.435-446
　　6.H. Choi, M. Koc, and J. Ni, 2007, “A Study on the Analytical Modeling for Warm Hydro-mechanical Deep Drawing of Lightweight Materials,” in International Journal of Machine Tools and Manufacture, Vol 47, No.11, pp. 1752-1766
　　7.Q. Chang, J. Ni, P. Bandyopadhyay, S. Biller, G. Xiao, 2007, “Maintenance Staffing Management,” Journal of Intelligent Manufacturing, Vol 18, pp. 351-360.
　　8.Z. Yang, D. Djurdjanovic, and J. Ni, 2007, “Maintenance Scheduling in Manufacturing Systems Based on Predicted Machine Degradation,” Journal of Intelligent Manufacturing, Vol. 19, pp.87-98
　　9.J. Liu, D. Djurdjanovic, J. Ni, N. Casoettto, and J. Lee, 2007, “Similarity Based Method for Manufacturing Process Performance Prediction and Diagnosis,” Computers in Industry, Vol. 58 (6), pp.558-566
　　10.Y. Lei, D. Djurdjanovic, J. Ni, J. Lee, G. Xiao, and J. R. Mayor, 2006, “System Level Optimization of Predictive Maintenance in Industrial Automation Systems,” Transaction of NAMRI/SME, Vol. 34, pp.79-86
　　11.H. S. Kim, M. Koc, J. Ni, and A. Ghosh, 2006, “Finite Element Modeling and Analysis for Warm Forming of Aluminum Alloys – Validation Through Comparisons with Experiments and Determination of a Failure Criterion,” ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 128, No.3, pp. 613-621
　　12.D. Djurdjanovic and J. Ni, 2006, “Stream of Variation (SOV) Based Measurement Scheme Analysis in Multi-Station Machining Systems,” IEEE Transactions on Automation Science and Engineering, Vol. 3, No.4, pp. 407-422 (13)
　　13.Zhenhua Huang, Albert Shih and Jun Ni, 2006, “Phase Unwrapping for Large Depth-of-field 3D Laser Holographic Interferometry Measurement of Laterally Discontinuous Surfaces,” Measurement Science and Technology. Vol. 17, pp. 3110-3119
　　14.Feng Ke, Jun Ni, and David Stephenson, 2006, “Chip-Thickening in Deep-Hole Drilling,” International Journal of Machine Tools and Manufacturing, Vol. 46, No. 12-13, pp. 1500-1507
　　15.J. Lee, J. Ni, D. Djurdjanovic, H. Qiu, and H. Liao, 2006, “Intelligent Prognostics Tools and E-Maintenance,” Computers in Industry, Special Issue on e-Maintenance, Vol. 57, No. 6, pp.476-489, August
　　16.H. Yang, and J. Ni, 2005, “Adaptive model estimation of machine-tool thermal errors based on recursive dynamic modeling strategy,” International Journal of Machine Tools and Manufacturing, Vol. 45, pp. 1-11
　　17.G.Y. Kim, R. Mayor, and J. Ni, 2005, “Parametric Study of Microreator Design for Water Gas Shift Reactor using an integrated reaction and heat exchange model,” Chemical Engineering Journal, Vol. 110, pp. 1-10
　　18.S. W. Lee, R. Mayor, and J. Ni, 2005, “Development of a Six-Degree-of-Freedom Geometric Error Measurement System for a Meso-Scale Machine Tool,” ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 127, pp.857-865
　　19.J. Lee, J. Ni, D. Djurdjanovic, H. Qiu, and H. Liao, 2005, “Intelligent Prognostics Tools and E-Maintenance,” Computers in Industry, Vol. 57, pp. 476-489
　　20.H. Chen, R. Mayor, and J. Ni, 2004, “Automated Structural Configuration Generation and Kinematic Error Analysis for Meso-Scale Machine Tools,” Transaction of NAMRI, Vol. 32, pp.327-334
　　21.Dragan Djurdjanovic and Jun Ni, 2004, “Measurement Scheme Synthesis in Multi-Station Machining Systems” ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 126, No. 1, pp.178-189 (11)
　　22.S. Zhou, K. Shin, S. Dyer, J. Shi, and J. Ni, 2004, “Extended Influence Coefficient Methods for Rotor Active Balancing during Acceleration,” ASME Transaction, Journal of Dynamics Systems, Measurement and Control, Vol. 126, pp. 219-223
　　23.Yizhu Zhang, Jiangqi Zhou, Zhongqing Lin, and Jun Ni, 2003, “Automatic process planning and subassembly detection for auto-body assembly,” Journal of Computer-Aided Design and Computer Graphics, Vol. 15(6), pp. 680-684
　　24.K. Shin and J. Ni, 2003, "Adaptive Control of Multi-Plane Active Balancing Systems for Speed-Varying Rotors," ASME J. of Dyn. Sys. Measurement and Control, Vol. 125, pp. 372-281
　　25.Dragan Djurdjanovic, Jay Lee, and Jun Ni, 2003,”Watchdog Agent—an infotronics-based prognostics approach for product performance degradation assessment and prediction,” Advanced Engineering Informatics, Vol. 17, pp. 109-125 (27)
　　26.Dragan Djurdjanovic and Jun Ni, 2003, “Bayesian Approach to Measurement Scheme Analysis in Multi-Station Machining System,” Journal of Engineering Manufacturing, Vol., No. B8, pp. 1117-1130 (2)
　　27.B. Zhang, and J. Ni, 2001, “Relative Probability Index Crp – An Alternative Process Capability Index,” Quality Engineering, Vol. 14(2), pp.265-276
　　28.C. Gong, J. Yuan, and J. Ni, 2000, “A Self-calibration Method for Robotic Measurement System,” ASME ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 122, No. 1, pp 174-181 (16)
　　29)A. Khan, D. Ceglarek, J. Shi, J. Ni, and T. C. Woo, 1999, "Sensor Optimization for Fault Diagnosis in Single Fixture Systems: A Methodology," ASME Transactions, Journal of Manufacturing Science and Engineering, Vol.121, No.1, pp. 109-117 (17)
　　30)J. Yuan and J. Ni, 1998, “The Real-Time Error Compensation Technique for CNC Machining Systems.” Journal of Mechatronics, Vol. 8, No. 3. pp. 359-380. (42)
　　31)J. C. Liang, H. F. Li, J. X. Yuan, and J. Ni, 1997, “A Comprehensive Error Compensation System for Correcting Geometric, Thermal, and Cutting Force-Induced Errors,” The International Journal of Advanced Manufacturing Technology, Vol. 13, pp. 708-712 (2)
　　32)E. Lu, J. Ni, and S.M. Wu, 1996, "An Integrated Lattice Filter Adaptive Control System for Time-Varying CMM Structural Vibration Control, Part I: Theory and Simulation", ASME Transaction, Journal of Engineering for Industry, Vol. 118, No.1, p 67-76, and also presented at 1992 ASME WAM (1)
　　33)P.S. Huang, and J. Ni, 1995, "On-line error compensation of coordinate measuring machines", International Journal of Machine Tools and Manufacture, Vol. 35, No. 5 , pp. 725-738.
　　34)Y.D. Chen, X.J. Tang, J. Ni, and S.M. Wu, 1994, "Automatic Digitization of Free-Form Curve by Coordinate Measuring Machines", International Journal of Production Research, Vol. 32, No. 11, pp.2603-2612, also in Proceedings of ASME WAM, Anaheim, CA 1992 (5)
　　35)J. Ni and S.M.Wu, 1993, "An On-Line Measurement Technique for Machine Volumetric Error Compensation", ASME Transaction, Journal of Engineering for Industry, Feb., Vol. 115, No.1, pp.85-92 (6)
　　36)J.S. Chen, J.X. Yuan, J. Ni and S.M. Wu, 1992, "Compensation of Non-rigid Body Kinematic Effect on a Machining Center", Transaction of NAMRI, Vol. 20, pp.325-329
　　37)H. Zhang, J. Ni and S.M. Wu, 1990, "Simulation Study of An Improved Scheme for Forecasting Compensatory Control", Transaction of NAMRI , Vol. 18, pp.329-333
　　38)F. Shen, J. Ni and S.M. Wu, 1989, "Design and Implementation of a Modular Multi-Processor System for Machine Monitoring and Diagnostics", Transaction of NAMRI , Vol. 17, pp.319-324

　　?軟件版權登記及專利
　　1)"Multi-Degree-of-Freedom Geometric Error Measurement System," (with co-inventor:  P. S. Huang),  US Patent Number: 5,418,611, (Filed June 14, 1993), Date of Patent: May 23, 1995
　　2)“A Novel Machining Chatter Prevention Technique Through Random Multi-Level Spindle Speed Variation,” (with co-inventors: Alpay Yilmaz, and Emad Al-Regib), disclosure filed, 4/1996
　　3)“A Roll Measurement Principle and System,” (with co-inventor: Jian He), disclosure filed, 4/1996

　　?學術兼職
　　2003-2004, 美國機械工程學會，制造工程分會，主席
　　2000.9 – 2005.8 美國機械工程學會，制造工程分會執行委員會委員
　　1997.7 – 2000.6，美國機械工程學會制造技術組技術規劃委員會委員
　　1994 – 2003，《制造系統》雜志副主編
　　1995 – 1999，2003 – 至今，機械工業部，中國機械科學研究院客座研究員
　　1994 – 1997，華中科技大學客座教授
　　1995 -1998，2004 –至今，臺灣工業技術研究院機械工業研究實驗室顧問委員會委員
　　1998 – 2001，2003 – 2006 ，清華大學客座教授
　　1999 – 2002，大連理工大學客座教授
　　2000 – 2003，西安交通大學客座教授
　　2001 – 2002，香港理工大學特聘講座教授
　　2002 – 2005，中國科學院海外評審委員會委員
　　2003－2006，中國科技部海外專家組委員
　　2004－至今，韓國機械與材料研究院，微細工廠計劃，科學顧問
　　2007－至今，南非科技與技術部，先進生產技術計劃，科學顧問
　　2008－至今，日本東京農工大學 客座教授

　　?榮譽獎勵
　　1991，制造工程師學會杰出青年制造工程師獎
　　1994，被克林頓總統授予美國國家科學基金總統教授獎
　　1999，中國國家自然科學基金會海外杰出青年基金獲得者
　　1999 – 2004, 中國教育部長江學者特聘、講座教授
　　2000-2001，美國密西根大學杰出教職成就Robert M. Caddell獎
　　2001, 北美制造研究年會最佳論文獎
　　2002 美國密西根大學工學院杰出研究獎
　　2002，制造工程師學會Fellow
　　2002，國際設計與制造前沿會議最佳論文獎
　　2003，上海市政府海外科學家杰出貢獻銀質獎章
　　2004，美國機械工程學會Fellow
　　2004，國際設計與制造前沿會議最佳論文獎
　　2005，半導體研究協會最佳論文獎
　　2006 - 2011，美國密西根大學工程學院吳賢銘冠名教授
　　2006-2007， 美國密西根大學工學院杰出教育成就獎
　　2007，半導體研究協會最佳論文獎
 

添加上海交通大學學姐微信，或微信搜索公眾號“考研派小站”，關注[考研派小站]微信公眾號，在考研派小站微信號輸入[上海交通大學考研分數線、上海交通大學報錄比、上海交通大學考研群、上海交通大學學姐微信、上海交通大學考研真題、上海交通大學專業目錄、上海交通大學排名、上海交通大學保研、上海交通大學公眾號、上海交通大學研究生招生）]即可在手機上查看相對應上海交通大學考研信息或資源。

上海交通大學